| Author |
Message |
pdean
Twinstar


Joined: Apr 01, 2006
Posts: 51
Location: North Hollywood, Ca
|
Posted:
Sat Apr 07, 2007 6:32 pm |
|
Please excuse the dumb question, but what is Seafoam? what does it do? and where can i buy some.
91605
Chef |
| |
|
|
 |
CB900SS
Red CB1100F


Joined: Jun 08, 2005
Posts: 5476
Location: Mastic, NY
|
Posted:
Sat Apr 07, 2007 6:37 pm |
|
|
|
 |
genesound
Red CB1100F


Joined: Feb 20, 2006
Posts: 11921
Location: Studio City, California
|
Posted:
Sat Apr 07, 2007 6:51 pm |
|
Oh NoHo eh pdean?
I'm in 91604.
You can get it at the Autozone on Vineland at Magnolia, or probably any Autozone.
It's good for getting the goo out of your carbs, about 1/2 a can to a tank, go for a ride run it all out. It will smoke some. |
_________________
We do not see things as they are,
we see things as we are.
What might have happened if that which did happen had not happened,
I cannot undertake to say.
|
|
|
 |
D-Day
Hawk


Joined: Jun 25, 2005
Posts: 282
Location: Charlotte, NC
|
Posted:
Sat Apr 07, 2007 6:57 pm |
|
I finally tried some in my old minivan. Sucked about 1/3 can into the vacuum on the air intake, let it sit, the fired it up. After the HUGE cloud of smoke/steam dissipated, the minivan runs better than it ever has. I think it does much the same thing that that shops charge $100 for (injector cleaning). |
| |
|
|
 |
andrea
Friend of the Board


Joined: May 23, 2006
Posts: 430
Location: Sestri Levante, GE - Italy
|
Posted:
Sat Apr 07, 2007 7:20 pm |
|
hi,
is SeaFoam or an equivalent product available in Europe ? I take from their website it is an usa-only product, but I've emailed them to know if they have dealers here anyway.
thanks
andrea |
| |
|
|
 |
Squatch71
CB1100F


Joined: Jul 31, 2005
Posts: 3088
Location: Big Sky Montana--Great Falls--
|
Posted:
Sat Apr 07, 2007 8:03 pm |
|
what they said....good stuff |
| |
|
|
 |
Weasel748cm
Silver CB750F


Joined: Mar 08, 2004
Posts: 634
Location: Vineland, Ontario
|
Posted:
Sat Apr 07, 2007 8:42 pm |
|
I'm a new believer in this stuff !!
My F has never ran so good since I had it .....
I only used about 1/4 can in the tank and OMG .... after
about 200 km my bike is running so good ...
Only regret is not finding it sooner ...
No hype.... just results ..
 |
| |
|
|
 |
pdean
Twinstar


Joined: Apr 01, 2006
Posts: 51
Location: North Hollywood, Ca
|
Posted:
Sat Apr 07, 2007 9:17 pm |
|
Thanks for the help. I'm going to put some in my VF1000R and see if she will run clean. Failing that i think i'll kill it Richard Prior style.
91605 Howdy neighbor Genesound
Chef |
| |
|
|
 |
firemun59
Red CB1100F


Joined: Sep 17, 2004
Posts: 4135
Location: Oshawa,Ontario,Canada
|
Posted:
Sun Apr 08, 2007 1:53 am |
|
you will be amazed......and once running clean your performance seems to be a touch crisper with it in the tank as well......  |
| |
|
|
 |
lj
Silver CB750F


Joined: May 05, 2005
Posts: 724
Location: Tucson,AZ
|
Posted:
Sun Apr 08, 2007 1:56 am |
|
The Pep Boys near me has been carrying it. It has been a bit hard to find, usually the autoparts stores would either be out or only have a can or two. PepBoys has a bunch. |
| |
|
|
 |
algby
Twinstar


Joined: Oct 08, 2005
Posts: 103
Location: Louisville KY
|
Posted:
Tue Apr 10, 2007 1:55 am |
|
What is the difference between Seafoam and Techron? I filled up once and got a bad tank of gas. I thought for sure carbs were bad. One addition of Techron and within seconds she was cured. I now add Techron once or twice a season. Also a few days ago I could not get my mower to start after sitting all winter. A couple of ounces of Techron and fired right up. |
| |
|
|
 |
Zippy
Twinstar


Joined: Jul 25, 2005
Posts: 230
Location: Pensacola, FL, USA
|
Posted:
Sun Jul 22, 2007 7:50 pm |
|
Should you add it to a full crankcase of oil or should you replace the oil with that amount of seafoam? And also, how long should you ride it? The directions for amounts are on the can I take it? Sorry for all the questions but I'm just trying to figure it all out before I buy some. Thanks! |
_________________ ______________________________
1981 Honda CB900F: Hindle stainless exhaust, CBR coils, NGK wires
2004 Honda XR400R |
|
|
 |
zman
CB1100F


Joined: Mar 25, 2006
Posts: 2594
Location: Los Angeles
|
Posted:
Sun Jul 22, 2007 11:26 pm |
|
|
|
 |
CoolCat
Friend of the Board


Joined: Jun 30, 2006
Posts: 851
Location: Milwaukee, WI
|
Posted:
Mon Jul 23, 2007 4:34 am |
|
A warning that we learned the hard way. Seafoam will eat rubber if used undiluted (such as in a carb cleaning capacity). My dad is trying to revive his '85 GoldWing. His carbs were gummed up so I recommended Seafoam because of how nice it worked for my 900F. I was thinking he'd put it in the gas and let it soak or something. He was thinking I meant to use it as a carb cleaner. It ate a rubber diaphragm in one of his carbs (the one he'd used it on). |
| |
|
|
 |
Grebnaws
Hawk


Joined: Nov 08, 2006
Posts: 347
Location: Champaign, IL
|
Posted:
Mon Jul 23, 2007 6:29 am |
|
My bike started leaking after using seafoam. I let the engine idle and rest with a few ounces of seafoam before draining the PO's mystery oil. The oil drained with some small booger-like pieces of dark sludge in it and the engine was filled with Rotella 15w-40. Once I ran the engine up to full temp a few times I noticed oil weeping from the cam cover, beneath the shift lever, and from the lower oil cooler fittings. The carburetors seem fine even though I ran the rest of the seafoam through my gas tank .
Maybe it was the seafoam? Maybe it was a high detergent diesel oil? Or maybe it's just old gaskets? Who knows, but now my bike leaves puddles at 3 different spots the week before I leave on a road trip.
Coincidentally, these symptoms are the precise reason I opted not to use synthetic in any old engine. Everyone has always told me that synthetics would wreck havoc on old engine seals, and if this is true, then it's a real testament to just how "good" of an oil Rotella is. |
| |
|
|
 |
Blainethemono
CB1100F


Joined: Mar 03, 2004
Posts: 3278
Location: Seattle
|
Posted:
Tue Jul 24, 2007 1:37 pm |
|
|
|
 |
syd123
Twinstar


Joined: Jul 22, 2007
Posts: 78
Location: Whitby, Toronto, Canada
|
Posted:
Tue Jul 24, 2007 8:54 pm |
|
Hi
So any Canadian store you can get this from anybody??? |
| |
|
|
 |
swampthing
MB-5


Joined: Jun 17, 2007
Posts: 18
Location: Cambridge, Wisconsin
|
Posted:
Wed Jul 25, 2007 1:02 am |
|
no doubt Seafoam can damage, especially if you let it sit. I've heard stories about all kinds of crap coming loose and floating about....
My bike (I know, it's not an "f") has been suffering gunky carb syndrome, so Sunday rode until tank was almost empty, dumped in half a can, rode another ten miles, stopped and filled up at the Shell station with fresh gas. I figured, what the heck, either this or pull the carbs. I took the easy route.
Anyway, the bike runs fabulous now. Starts right up, idles like it's supposed to, and runs right up to redline without stumbling. Worked for me!
BTW, Seafoam is readily available everywhere around here. I buy it at Farm and Fleet. |
| |
|
|
 |
CoolCat
Friend of the Board


Joined: Jun 30, 2006
Posts: 851
Location: Milwaukee, WI
|
Posted:
Wed Jul 25, 2007 5:18 am |
|
| swampthing wrote: |
no doubt Seafoam can damage, especially if you let it sit. I've heard stories about all kinds of crap coming loose and floating about....
My bike (I know, it's not an "f") has been suffering gunky carb syndrome, so Sunday rode until tank was almost empty, dumped in half a can, rode another ten miles, stopped and filled up at the Shell station with fresh gas. I figured, what the heck, either this or pull the carbs. I took the easy route.
Anyway, the bike runs fabulous now. Starts right up, idles like it's supposed to, and runs right up to redline without stumbling. Worked for me!
BTW, Seafoam is readily available everywhere around here. I buy it at Farm and Fleet. |
So, were you running primarily on Seafoam then? With just a little gas left in the mix?
Interesting, I didn't realize that would work. I've got a lawn tractor I forgot to "Stabil-ize" that doesn't want to start now. Maybe I'll try this trick on it. |
| |
|
|
 |
stamper
Twinstar


Joined: Dec 17, 2005
Posts: 54
Location: Chapel Hill, North Carolina, USA
|
Posted:
Wed Jul 25, 2007 3:09 pm |
|
I've used both the Seafoam and Techron. My unscientific finding is that the Techron works better, and it gets *my* vote.  |
| |
|
|
 |
Fitter
Friend of the Board


Joined: Mar 31, 2005
Posts: 1966
Location: Northumberland Forest, Canada
|
Posted:
Wed Jul 25, 2007 3:10 pm |
|
| syd123 wrote: |
Hi
So any Canadian store you can get this from anybody??? |
Only 'NAPA' seems to have it. |
| |
|
|
 |
pd
MB-5


Joined: Mar 22, 2007
Posts: 26
Location: West Michigan
|
Posted:
Wed Jul 25, 2007 4:17 pm |
|
swampthing wrote:
BTW, Seafoam is readily available everywhere around here. I buy it at Farm and Fleet.
Dang , I thought Farm & Fleet was bought out by TSC and got transformed or absorbed ... ( use to work there )
Anyway , I haven't tried Seafoam , but I have and am running ' 104+ Octane Booster and Injector Cleaner ' . They recommend almost an ounce per gallon of gas . That does a fine job of cleaning for the first and maybe second tank full ( depending on how bad the carbs are ) . I run two ounces per tank under normal and everyday conditions ( when I remember ... CRS Disorder , ya know ? ). |
| |
|
|
 |
CowTownBiomed
Red CB1100F


Joined: Apr 02, 2004
Posts: 7542
Location: Calgary Alberta Canada
|
Posted:
Wed Jul 25, 2007 5:54 pm |
|
| Fitter wrote: |
| syd123 wrote: |
Hi
So any Canadian store you can get this from anybody??? |
Only 'NAPA' seems to have it. |
Also
Auto Value, Parts source and Canadian Tire (at least in Calgary anyway) |
| |
|
|
 |
syd123
Twinstar


Joined: Jul 22, 2007
Posts: 78
Location: Whitby, Toronto, Canada
|
Posted:
Wed Jul 25, 2007 7:59 pm |
|
Got it from Napa, 11.99 now this is for a 550f so anybody with experience want to let me know about how much to put in the tank and oil? |
| |
|
|
 |
CowTownBiomed
Red CB1100F


Joined: Apr 02, 2004
Posts: 7542
Location: Calgary Alberta Canada
|
Posted:
Wed Jul 25, 2007 8:03 pm |
|
yep! you can on your car.
There have been reports of folk noticing clutch slipage after crankcase use, so I'd refrain from that. |
| |
|
|
 |
genesound
Red CB1100F


Joined: Feb 20, 2006
Posts: 11921
Location: Studio City, California
|
Posted:
Wed Jul 25, 2007 8:18 pm |
|
I would not put it in the crankcase, and I wouldn't let it sit in the carbs for long either. Put it in the tank and run it out the same day and get fresh gas in there. |
_________________
We do not see things as they are,
we see things as we are.
What might have happened if that which did happen had not happened,
I cannot undertake to say.
|
|
|
 |
CowTownBiomed
Red CB1100F


Joined: Apr 02, 2004
Posts: 7542
Location: Calgary Alberta Canada
|
Posted:
Wed Jul 25, 2007 9:20 pm |
|
| genesound wrote: |
| I wouldn't let it sit in the carbs for long either. |
Why? Are you afraid of clean float bowls?
It wont touch the plastic floats. |
| |
|
|
 |
genesound
Red CB1100F


Joined: Feb 20, 2006
Posts: 11921
Location: Studio City, California
|
Posted:
Wed Jul 25, 2007 9:43 pm |
|
If somebody has an old rubber part like an old air cuttoff, it would be interesting to see what happens to it in full strength Seafoam after a couple of days. If it passed that test, then i would have no qualms about leaving it in my tank and carbs for extended periods. |
_________________
We do not see things as they are,
we see things as we are.
What might have happened if that which did happen had not happened,
I cannot undertake to say.
|
|
|
 |
swampthing
MB-5


Joined: Jun 17, 2007
Posts: 18
Location: Cambridge, Wisconsin
|
Posted:
Thu Jul 26, 2007 1:03 am |
|
I would only dump Seafoam into a clean fuel tank. Don't want any of those fossilized rat bones stirred up in the ol' crock pot.... just a word to the wise.
Farm and Fleet's headquaters and main store is still hear in Janesville, and they will be building a new one soon on the west side of Madison. My wifes "favorite" store; smells like tires!!
F&F's cousin store, Fleet Farm, is still around too. Like anybody cared.  |
| |
|
|
 |
pd
MB-5


Joined: Mar 22, 2007
Posts: 26
Location: West Michigan
|
Posted:
Thu Jul 26, 2007 1:04 am |
|
hmm , isn't there an o ring on the bowl drain screw ?
and doesn't , at least some fuel rest in the idle passage which is regulated by the idle adjustment screw sealed by an o ring ?
I'm not the expert I'd like to be ...
Just making suggestions ...  |
| |
|
|
 |
|
|