Search found 295 matches

Wow, Fantastic! Thanks for your efforts all these years!!!!

Covered bridge in eastern PA

Haven't needed any in a while so I'm not up on availability or costs. But Vintco, big in aftermarket vintage dirt bike parts now has shims.
https://www.vintco.com/shop/part/Valve-Shim-Kits

Old gas can lockup injectors too.

Test by spraying some ether into the intake to see if the motor fires. If it does, the problem is fuel delivery related.
Thanks! were doing that now.

I have little experience with it in motorcycles. Trying to help a friend with a Suzuki boulevard. Been sitting for 3 years so I know 3 year old gas is bad in carbs. How bad in injectors etc?

To young for sure but a different part of the world. Sharp edge sheet metal doesn't go with sandal's, yikes.

Man, the bikes and parts he has! Crazy

Hey David. I used this Dremel carbide cutting wheel to cut ABS and it worked great. https://www.homedepot.ca/product/dremel-1-1-2-inch-ez-lock-carbide-cutting-wheel-for-wood/1000668815

Me too, work ...

Was sad to see former American motocrosser Andrew Short go out.

And an even greater American!

Thanks guys. My Bell full face has openings on the side between pads that my glasses frames fit through nicely but there just to high fo proper placement over my eyes.

Well I know need glasses for distance Sad

Any of you guys in the same boat use a full face helmet your happy with?

Good stuff, thanks BJ! Really going to try the in () one. I hate when hundreds of turn signals and mirrors come off for my Harley motocrosser!

Thanks for the info guys. His plan was to bring it to Martins but now can't make it. I'll get a picture and post.
My brother had an early one and did get a complete new engine from Honda. He was a me ...

Is there a following for these as there is for our bikes? Guy that does work at my house that i have known for years is asking $900 for a running on the road 1986 VF500F.
Says the best offer he got w ...

Glad to hear!!!!

I have had 3 good experiences using Uship. And like Wayne said, once you get a good guy. Just go to them direct in the future. You'll find many guys stick to a constant area and now based on where the ...

http://www.beinsports.com/us/worldsbk/video/nicky-hayden-the-nicest-guy-in-the-paddock/548307

RIP Champ!

For sure. All the best to him and his family.
Hes the reason I started watching Motogp.

Thanks Brett, have some in the house so am aware and fine with it.

If you don't want to hang light fixtures, and you already have standard bulb sockets on the ceiling, try these:

http://dlclights.com/40w-led-standard-e26-base-with-free-e39-base-converter-commercia ...

Looking to put up new/more lights in my garage. Thinking 8' strip lights from the local home center. In the past always went florescent but with them being phased out was hoping something new in LED. ...

Nice, enjoy. If its tight Forrest? Take a at a Rekluse clutch.

I want the chopper he rode in on!

From the research I did, i learned they were the same exact for 4-5 years. somewhere between late 60s early 70's. Probably have to go buy the serial 3 but who knows where to find a data base. I only k ...

The front flanges on the gas tank also match up. The only mystery remaining is the year of the bike, but that isn't as important. That could be difficult or impossible to determine.

Just imagine ...

https://www.hagerty.com/articles-videos/articles/2015/07/27/mail-order-motorcycle

Take a look. I think it is a Sears 106ss. They were late 60's.
I actually own this one.

I'm going to say Italian. Ducati like jt said, Gilera, Benneli and others from this era looked very much alike. It not for the gas tank its a dead ringer for a Sears 106ss made by Gilera.

Very cool!