Search found 630 matches

The starter clutch is not behind the rotor on a CB1100F
its on the opposite side of the engine
just make sure you hold the 24mm hex on the ATU unit with a spanner before loosening the 12mm hex bolt

Welcome to the group and good luck with your project
The 1300 kit has been discussed before on this group

[url=https://cb1100f.net/modules.php?name=Forums&file=viewtopic&t=90395&highl ...

There's a facebook forum that Max loosely started

This is the link

[url=https://www.facebook.com/groups/480620788793999]https://www.facebook.com/groups/480620788793999

CBDecals.....you'll wait 3 months, but I've been happy with their products.

I am in the UK and have bought a few sets over the years, CB900F/CB1100F and CB1100RC, always arrived within a couple of ...

Just fitted a set of Michelins new "Road Classics" to my '82 750F just waiting to overhaul the brakes and i'll be out, comments to follow.

The range has a good selection of sizes to suit ...

Thanks for posting..great article

There will come a day when the crank bearings may not be available from Honda so would be nice to find an alternative before that happens

Keep us updated with your findings Jim

Keith

Not sure when they started making them but possibly not in the 1980's
I have used a couple, not bad systems, no re jetting required and a quiet system, the BS AU 193 is a British standards mark to sh ...

Looks in great condition, they are great bikes and you will enjoy riding it

Keith

CB985

I'm very pleased with the HJC RPHA 11, I also had RPHA 10, very light, flows lots of air, they are race helmets so you need earplugs.

Toddk

Yes i bought a HJC RPHA II last year, did a 350 mile ...

So the Chinese bearings are .25mm which is .0098” thicker than what Honda sells? Am I understanding that correctly? That’s plenty or room to grind the crank. What am I missing?

You are missing not ...

I remember Sonicrete searched high and low for bearings many years ago and came up with nothing

Obviously Honda had them made as a special order to their spec along with the grooved gearbox bearing ...

One thing to bear in mind is the supplied Honda bearings are not a constant thickness around the radius of the shell
This was disgussed here many years ago

I have measured recently purchased and a ...

Hello All
i do have an dead VB56A carburator from a CB1100 mounted on my CB900F 1981...To many time up and down, changing this, trying this... yes air pod are mounted as well and they are a pain, bu ...

I contacted LA sleeves recently as they make the Wiseco 72mm liners, they supply them just over 69mm so can be used for the stock 70mm bore or 72mm oversize

Would still like to find BLACK UK CB900FA SWY900W , last UK log book update in 2012, been on UK SORN since 2014 Smile

As you are in the Uk get the latest Practical sports bike magazine,they have a ne ...

I would expect them to arrive soon, but since the Corona problem has started many airlines have either stopped flying or greatly reduced their capacity on many routes
This means other airlines still ...

Thanks for posting that was an interesting read

A guy on Do the Don site says the muffler bearing fix is not necessary. Im going with pods too.

Dont forget to order the wrap for the headers while you are at it Very Happy

Looking back through my old posts i asked this question many years ago with no positive answers

http://www.cb1100f.net/modules.php?name=Forums&file=viewtopic&t=61597&highlight=

Does anyone know anything about large capacity oil pumps? I found this pump in my stash of parts and the oil cooler stage is quite a bit larger than the standard pump. I thought it might be from an 11 ...

Here are pairs on eBay in the UK

A few of the US members have bought from here in the past

Keith

[url=https://www.ebay.co.uk/itm/Pack-of-2-TA2428Z-IKO-Needle-Roller-Bearing-Motorbike-Swingarm ...

I know this is headless's thread but as its about Titanium I thought I might add to it.

Some of you have already received the improved shift detent and read that it was copied directly from our ow ...

Have used a couple with no problems

Keith

Thanks Keith. They seem to be good quality seals. Also what is the little bitty seal for? The next size up is for the tach drive in the cam cap I believ ...

Has anyone used the Tour Max seal kit for our engines (part # OSL-112)? Wondering what kind of results you had. Thanks.

https://i.imgur.com/qjfhvPSl.jpg

Have used a couple with no problems

Ke ...

My photos are still in my photo bucket but unable to upload unless I pay,I have downloaded most now, was using tiny pics but that’s disappeared, not sure what there is that’s free to use for photos no ...

Dirty Mary ended in England and was sold to a guy called Jim in Ireland, it did appear on a Facebook group a few years ago when he was riding it on a trackday

Keith

CB1100RC decal sets are available here

[url=https://www.ebay.co.uk/itm/1982-Honda-CB1100RC-warning-service-label-set/361605781830?hash=item5431625946:g:-MAAAMXQMTlRa3Ve]https://www.ebay.co.uk/i ...

I have fitted Marving 4-2 systems on 2 of my CB1100F's
They fit well and the bike performs well with them
When fitting you need to position the front pipes in the exhaust ports then, loosly fit the ...